Flow Control Angle Points
| Units: | ° |
| Mode: | Input Only |
| Multi-band: | True |
| Default Value: | 0 |
| Validation Rule: | ≥0 |
| Key Property: | No |
| Description: | Flow control angle points |
| Detail: |
Flow Control Angle Points is used to define multi-band Flow Control Angles with Flow Control Flow Loading Points. A piece-wise linear curve can be defined with those two properties, given a fixed angle-flow function. The Angle Points is always decreasing with increasing Flow Loading Points, because of the operating principles.
Example:
| Property | Value | Units | Band |
| Angle Points | 2 | degrees | 1 |
| Flow Loading Points | 0 | % | 1 |
| Angle Points | 1.8 | degrees | 2 |
| Flow Loading Points | 30 | - | 2 |
| Angle Points | 0.8 | degrees | 3 |
| Flow Loading Points | 80 | - | 3 |
Properties shown in above table will define a piece-wise linear angle-flow curve as below:
Figure 1: Flow Control angle points with line flow loading
See also: