LT Plan Block Count
| Units: | - |
| Default Value: | 12 |
| Validation Rule: | ≥1 |
| Description: | Number of load duration curve blocks in each day/week/month. |
| Detail: |
LT Plan Block Count applies when the Chronology = "Partial" or "Fitted". It controls the level of detail in each load duration curve (LDC) i.e. the number of unique load levels in each LDC. The more blocks the higher the accuracy of the LDC in representing the load, but the larger the optimization problem becomes because each block is a simulation period. The number of load duration curves created is controlled by the LDC Type option, and you can control the number of LDC solved in each simulation step with the At a Time setting.
The block count may vary across the Horizone.g. to reduce the detail used in later periods of the simulation, using the Last Block Count setting. Reducing the block count over time will improve simulation performance but reducing the number of simulation periods required.
The number of simulation LDC, simulation periods, blocks and the savings from reducing the block count over time is reported in the simulation log file at the start of the simulation phase.
Example
In the following example the simulation Horizon is two years long solved in one step. LDC Type is "Week" and Block Count is five, with Last Block Count set to one.
With Block Count of five the total number of periods would normally be 52 × 2 × 5 = 520, but by reducing over time to one block, with the Last Block Count setting, the simulator reports a total period count of 154.
----------------------------------------------------------------------------------------
Load Slicing Settings
----------------------------------------------------------------------------------------
Chronology...................................................... Partial
Step Type....................................................... FISCALYEAR
Step Count...................................................... 1
Load Duration Curve (LDC) Type.................................. Week
Blocks in first LDC............................................. 5
Blocks in last LDC.............................................. 1
LDC per Step.................................................... 105
Overlapping LDC................................................. 0
Average Periods per Step........................................ 154.33
Period Reduction................................................ 70.60%
----------------------------------------------------------------------------------------